AP50/AP80 RO units

These RO units have been manufactured for small to medium RO water production (respectively 190 and 275 litres per day).
AP50 and AP80 RO units are supplied with a carbon cartridge for eliminating chlorine from tap water, which can damage the TFC membrane.

APKS - sediment cartridge kit for AP50/80

This kit includes a sediment cartridge and connectors plus two double clips for assembling to the membrane vessel.
It can be assembled to the AP50 and AP80 units in case the water contains sediments which could clog both the carbon cartridge and the TFC membrane.

AP50S/AP80S/AP100S RO units

These RO units are provided with a 10" transparent filter housing with a sediment cartridge and a 10" white filter housing with a block carbon cartridge. All parts of the unit are assembled to a metal bracket for wall mounting.

A special ring spanner for opening and closing the 10" filter housings is also supplied.

The AP50S , AP80S and AP100S RO units have a daily production respectively of 190 , 275 and 380 liters.

AP80/AP100 SHOP RO unit

These professional units have a daily production of 275/380 liters and include:

• One 10" transparent filter housing with sediment cartridge
• Two 10" white filter housings with carbon cartridges
• One 24V solenoid check valve
• One 24V float switch with relay for level control of the holding tank
• One vessel with 275/380 liters/day TFC membrane
• One 24V booster pump with transformer (pressure 8 bar)
• One carbon post-filter
• One flow restrictor
• One metal bracket for fixing the unit to a wall
• One ring spanner for opening/closing the 10" filter housings

AP150/AP200 SHOP RO unit

With a daily production of 550/760 liters, these professional units include:

• One 20" transparent filter housing with sediment cartridge
• Two 20" white filter housings with carbon cartridges
• One 24V solenoid check valve
• One 24V float switch with relay for level control of the holding tank
• Two vessels with TFC membrane 275/380 liters per day each
• Two-24V booster pump with transformer (pressure 8 bar)
• Two flow restrictors
• One ring spanner for opening/closing the 20" filter housings
• Electronic control of automatic membrane auto-flushing.

All above-mentioned parts are fixed to a metal frame, which can be placed on the ground.

All different operations are electronically controlled and delayed for safety and long life of the unit.